RV Sewer Hose Support: How Much Slope You Need and What to Buy

Quick answer: Good Sam’s blog says to make sure that your sewer hose slopes continuously from your RV outlet to the park’s connection point. [1] Good Sam’s blog says laying your hose along the ground is rarely the best solution to proper and continuous downward slope. [1] When you plan an RV sewer hose support, check the height of the inlet first, and ask for another site if the inlet sits above your outlet.

This guide shows how to choose and set up an RV sewer hose support: how to measure your run, what the slope rule means in practice, how common supports compare on the makers’ own pages. And a checklist to use at every hookup. It also covers the hygiene points that matter any time you handle a sewer hose. The method is written out in words, so you can follow it with a tape measure and a pencil at any campsite.
How we checked this guide for Rv Sewer Hose Support
We have not tested these products for this article. Retailer prices change, so check before you buy. The method and the checklists are ours.
Where the slope rule comes from. Lippert’s Flow Down installation manual (a PDF) gives a minimum drop per foot of run for its own support kit. It also tells the installer to set the RV end of the support as high as possible but still under the RV sewer hookup. We read that PDF directly, but we could not find the same wording on a web page that anyone can re-check, so we do not print the figure here. Read it in the manual before you rely on it. It is one manufacturer’s number for its own kit, which is a different product from the supports compared below. We use it as a practical rule of thumb for any supported hose, because we found no competing figure in the other sources we read. Wherever this guide says “the slope rule,” it means the minimum drop per foot in that manual. This guide was drafted with AI assistance.

Free download: The Full-Time RV Launch Checklist
Our 16-page planner: a 12-month countdown, inspection checklist, budget and weights worksheets and a maintenance calendar. Free and printable.
What a rv sewer hose support does
A hose that lies on bare ground follows the ground. That is fine on a smooth, even slab, but most campsites are not smooth. Lippert says the adjustable height keeps the hose elevated for proper drainage flow. [2] Valterra says its EasySlider hose support telescopes to support a sewer hose, providing a complete even flow to the sewer. [3]
Supports help with three things:
- Sags. Good Sam’s blog says trapped waste hides in any dip or reversed slope section of the pipe that it can find. [1]
- Alignment. Valterra says its Slunky allows hose to curve around obstacles. [4] Lippert says its support is flexible for obstacles and curves around rocks, trees, or campground layouts while keeping hoses properly supported. [2]
- Handling. Lippert says its adjustable height allows you to keep sewer hoses elevated, preventing kinks and ensuring smooth flow from your RV to the dump station. [2]
Good Sam’s blog says the park often has a concrete pad raised above the surrounding grade level, introducing an uphill situation near the connection point. [1] Check the height of the inlet first, before you choose a support, because a support cannot fix a connection that sits too high.
The slope rule and what it means for your hookup
Read the box near the top of this guide for the slope rule and its source. Apply it to every run before you set up. Keep the drop continuous along the whole hose, and avoid a stretch that falls steeply and then runs flat. Use the rule as a rule of thumb, not as a promise.
What to measure for Rv Sewer Hose Support
Three measurements decide almost every hookup. First, measure the height of your sewer outlet above the ground, with the rig level and the jacks down if you use them. Second, measure the height of the campground inlet above the same ground. Third, measure the length of the run along the path the hose will really take, including every curve.
Take the measurements in the same units, and write them down before you unroll the hose. Do not guess at the run. If the path bends around a post or a tree, follow the bend with the tape instead of measuring a straight line.
Comparing the drop you have with the drop you need
Subtract the inlet height from the outlet height. The result is the drop you have. Then find the minimum drop per foot in the manual, and multiply it by the run, in feet, to get the drop the rule asks for. Compare the two.
If the drop you have is larger, go ahead, and keep the extra room as margin against sags. If it is smaller, shorten the run, lift the outlet end of the support, or ask for a different site. Prefer a hookup where the drop you have is clearly larger than the drop you need, and keep some margin in hand for sags.
What the maker’s listed heights tell you for Rv Sewer Hose Support
Valterra lists the Slunky Hose Support with a ridged bottom for gripping power, three tie-down straps included, and Height: Sewer End = 4.5 in, RV End = 7 in. [4] Valterra says the Slunky maintains proper elevation for best drainage. [4]
Compare the two listed end heights with the length of the support to see how much fall the maker builds in. Then compare that fall with the minimum from the manual.
A Lippert press release about its Flow Down support says one kit extends to more than 10 feet and it can be easily expanded to 20 feet by adding a second kit. [5]
Walkthroughs for four common hookups for Rv Sewer Hose Support
These walkthroughs use words only. Follow the same steps with your own measurements, and you will reach the same kind of answer.

Walkthrough: a site with plenty of room
Start by measuring the outlet height, the inlet height and the run. Work out the drop you have, then work out the drop the rule asks for. If the first is far larger than the second, go ahead with the support and keep the setup simple. Lippert says its adjustable height allows you to keep sewer hoses elevated. [2]
Lay the hose in the support, then look along its length from the outlet end. Confirm by eye that the slope is continuous and that nothing dips before you open a valve. Do not lay a bare hose across rough ground in place of the support, and check every high point and low point first.
Walkthrough: the inlet is too high
Measure the inlet first. Check whether it sits higher than your outlet, for example on a raised concrete collar or a pipe stub. If it does, stop and think before you unroll anything. Do not expect a support to make the hose run uphill. Good Sam’s blog says a raised concrete pad introduces an uphill situation near the connection point. [1]
Choose the options that do not involve improvising. Ask the office whether another site has a lower inlet. Ask whether staff can lower or move the connection. Do not stack blocks or boxes under the hose at your end to cheat the slope, because an improvised stack can slip and drop the hose.
Walkthrough: the run is longer than the support
Measure the run along the real hose path, then compare it with the length of the support. If the run is longer, look hard at the last stretch, the part with nothing under it, because a sag is most likely to form there. Remember that the drop the rule asks for grows with every extra foot of run. A Lippert press release says one kit can be easily expanded to 20 feet by adding a second kit. [5]
Choose a longer support, or one that can be extended. Move the RV closer, or ask the campground for a closer site. Avoid filling the gap with blocks, boxes or buckets.
Walkthrough: the same site after you re-level
Check what a change in rig height does to the outlet before you make it. Raise or lower the rig only when you are ready to measure again. Then measure the outlet, work out the drop you have, and compare it with the drop the rule asks for.
Look along the hose again once the rig has settled. Repeat the three measurements whenever the height of the rig changes. Never assume that a hookup that passed once still passes. Keystone’s guide says to ensure a good downward slope for efficient draining. [6]
Three common supports compared
Read each maker’s own page before you buy, and measure the compartment where your hose lives. The lists below follow those pages and nothing else.
The hinged support
- Valterra lists the Slunky Hose Support, 10′, Red, Boxed under SKU S1000R. [4]
- Valterra says the Slunky has a new improved design with metal hinges for extra strength and long life, and a self-fastening strap for easy storage. [4]
The telescoping type
- Valterra says the EasySlider telescopes to support a 3 in x 10’ sewer hose and collapses to 3’ for easy storage. [3]
- Valterra says to telescope the EasySlider to the proper length, hook the chain over your sewer pipe outlet, then connect your sewer hose and place it in the channel of the EasySlider. [3]
The adjustable support
- Lippert lists the 10′ RV Sewer Adjustable Hose Support, SKU 2025022183, at $39.95. [2]
- Lippert says its collapsible design allows compact, easy storage, folds to 7.5 in W x 6.25 in D x 10 in H and includes a strap. [2]
- Lippert says its universal hose fit works with all standard RV sewer hoses, providing support for proper flow and efficient dumping. [2]
- Lippert lists an extended length of 10′, a warranty term of 1 year and shipping dimensions of 10.43 in L x 7.68 in W x 6.69 in H, 3.3 lbs. [2]
Compare the folded size, not the shipping box, and pick the support that suits your storage space and your sites. Prices change often, so confirm the current price on the maker’s page or at a retailer before you order.
Questions to ask before you buy
- Where will it be stored? Compare the folded size with the compartment, bumper tube or bin where the hose lives. Check the folded size on the product page, not the carton.
- Does it fit your hose? Check the product page for the hose size you own before you order.
A hookup worksheet
Fill this in the first time you set up at a new site, before you open a valve. Keep the blank cells in a notebook or on your phone, and reuse the same rows at every stop.
| Measure or check | Your reading |
|---|---|
| Outlet height above ground | |
| Inlet height above ground | |
| Run length along the hose path | |
| Drop you have | |
| Drop the rule asks for | |
| Support length | |
| Dips or rises after laying the hose |
Use the rows in order. Write the two heights first, then work out the drop you have and the drop the rule asks for. Compare those two rows before you go any further, and avoid forcing a hookup that fails on paper.
How to set up a supported hose step by step
- Look at the site first. Find the sewer inlet and compare its height with your outlet. If the inlet sits above your outlet, stop and ask about another site.
- Estimate the run. Measure from the outlet to the inlet along the path the hose will take, including curves. Apply the slope rule to get the minimum drop.
- Place the support. Set the RV end of the support as high as the hookup permits while staying below the outlet, then work outward toward the park connection. Keystone’s guide says to attach the sewer hose to the termination valve and route the open end to an approved dump station, ensuring a good downward slope for efficient draining. [6]
- Lay the hose in the support. Attach the hose to your rig, insert the other end into the park inlet, and make sure the hose follows the support the whole way.
- Check the slope by eye along the whole length. Look for any dip, bend or section that rises. If you see one, adjust the support or move it.
- Secure it for a long stay. Use a bungee cord around the support and the hose if you stay a while, and follow the instructions for your own product.
- Keep your hands clean. Read the hygiene section below.
Hygiene and safe handling
Assume every sewer connection is dirty. Keystone’s guide lists rubber gloves for hygiene and protection while handling the sewer hose. [6] Keystone’s final steps say to replace the termination cap and wash your hands thoroughly with antibacterial soap or sanitizer. [6] Keystone’s guide also says to start by opening the black tank termination valve, then open the gray tank valves one at a time to flush any black water residue from the sewer hose. [6] Check your own manual for the sequence it specifies.
Keep waste equipment away from drinking water. Indiana’s rule for RV campgrounds says a sign must be posted at the sanitary dumping station stating that the adjacent water outlet is “UNSAFE FOR DRINKING.”[7] Use a separate hose for rinsing, and never use your fresh-water hose for cleanup. When you disconnect, watch for trapped waste. Good Sam’s blog says the most common cause of accidental sewage waste spill is the release of unexpected trapped waste inside your sewer hose. [1] Keystone’s guide says that once all tanks are drained, you close the termination valves, rinse the sewer hose, and store it properly. [6] Empty waste at a proper sewer connection or dump station. Indiana’s page says water at the dumping station drain must discharge to an approved wastewater disposal system. [7] Read our guide to dumping your tanks for the step-by-step procedure.
Hookup checklist
- Inlet height. Compare the inlet with your outlet; if the inlet sits above the outlet, ask for another site and do not improvise.
- Slope. Compare the drop per foot with the slope rule all along the run. if the hose falls short, lift the outlet end of the support, shorten the run, or move your rig.
- Dump route. Keystone’s guide says to route the open end of the hose to an approved dump station. [6] Ask the office where the sewer inlet is before you unroll anything.
- Dips and kinks. Look along the whole hose; if you see a dip or a kink, adjust the support and lay the hose again.
- Length. Confirm the support covers the whole run; if it falls short, add a section or move closer.
- Connections. Check the fittings at both ends; tighten any loose one and look for leaks before you open the valves.
- Hygiene. Put on gloves and keep the rinse hose apart from the fresh-water hose.
- Leveling. Level your rig for the stay, and read our guide to leveling blocks first; check the run again after any change in height.
Common mistakes
- Avoid judging by the hose alone; check the inlet height first.
- Avoid stacking blocks or boxes under the hose; use a support that holds a continuous slope.
- Look for a dip near the park end of the hose.
- Check the run again after you change the rig’s height.
- Choose a support by the length and height of your runs and by where you can store it.
- Do not skip the walk along the hose before you open a valve.
How this guide was researched
This guide is built from published documentation, public agency and standards guidance, manufacturer or operator specifications, and independent published testing rather than from first-hand testing, travel, or ownership by this site. Where a price, rule, specification, or inclusion is quoted, it reflects what the source published at the time of review. confirm the current terms directly with the provider before you act on them, because these details change without notice.
Last reviewed on .
Frequently asked questions
How much slope does an Rv sewer hose support need?
Check the manufacturer’s manual for the minimum drop per foot, then check the whole run for dips. Good Sam’s blog says trapped waste hides in any dip or reversed slope section of the pipe. [1]
Do I need a rv sewer hose support?
Check your campground’s policy and your state’s rules before you decide. Valterra says its EasySlider hose support telescopes to support a sewer hose. [3] Use a support wherever the bare hose sags or the inlet is far off.
What if the campground sewer inlet is higher than my RV outlet?
Ask the campground for another site, or ask staff to adjust the connection. Good Sam’s blog says the park often has a concrete pad raised above the surrounding grade level. [1] Avoid improvising with blocks or boxes.
Is the hinged support or the telescoping one better?
Compare the product pages above, then pick the one that fits your storage space and your sites. Valterra says the Slunky has metal hinges for extra strength and long life. [4] Check the retailer for the current price.
How long should the support be?
Cover the whole run from your outlet to the inlet. A Lippert press release says one kit extends to more than 10 feet. [5] Measure the run, then compare it with the length of the support.
Do I need gloves?
Wear gloves while you handle the sewer hose. Keystone’s guide says to wash your hands thoroughly with antibacterial soap or sanitizer. [6]
Sources
- It all flows downhill, right? – Good Sam Camping Blog ()
- Lippert 10′ RV Sewer Adjustable Hose Support #2025022183 | Lippert ()
- Easy Slider 10′ Hose Support, Boxed – Valterra.com ()
- Slunky Hose Support, 10′, Red, Boxed – Valterra.com ()
- Lippert Components® to distribute Flow Down™ adjustable RV drain support system | Lippert Legacy API ()
- Essential Guide to RV Black and Gray Tanks: Setup and Maintenance – Keystone RV ()
- Environmental Public Health: Sanitary Dumping Stations ()
Questions and comments